Advanced Air System Control
  

Energy savings – on demand!

As much as 20% to 60% of the energy used to operate compressed air systems is wasted. This is primarily due to operating more compressors than necessary, operating the wrong combination of compressors or maintaining elevated system pressure. Ingersoll Rand X8I System Automation can help reduce operating costs, while maintaining confidence in a sufficient and efficient air supply at all times.

  

  
 
Now you can cut operating costs with your existing equipment!
  
  

Ingersoll Rand X8I System Automation can manage up to eight positive displacement compressors – including compressors of different capacities, different types (fixed speed, variable speed and variable capacity), and in any combination or configuration. Through advanced control functionality and universal connectivity the X8I will work with your existing compressors, from Ingersoll Rand or any manufacturer, to improve operating efficiency and reduce energy costs.

 
  • Operate compressors only as needed, bringing standby compressors on-line incrementally during periods of increased demand.
 
  • Dynamically match the most energy-efficient compressor or combination of compressors with compressed air demand.
 
  • Operate one or more variable-speed compressors to minimize wasted energy due to unloaded compressor run on time or short cycle operation.
 
  • Manage the compressed air system at your minimum required pressure without compromising the reliability of your compressed air supply.
 
  
 
Tailoring supply to demand
  
  

The X8I continuously monitors and “learns” the demand requirements of the system by comparing pressure dynamics with compressor operating capabilities and control reaction. Adaptive control logic and advanced control algorithms are used to implement a "best fit" compressor combination and configuration strategy. The X8I is designed to effectively and efficiently manage your air compressors' capabilities to meet and match

the dynamic demand variations common to almost all systems.
The primary function of Energy Control Mode in Ingersoll Rand X8I System Automation is to:
• Match compressed air supply to compressed air demand, dynamically.
• Utilize the most energy-efficient combination of air compressors to satisfy that demand.

  
  
Minimize wasted energy and costs
  
  
  
A User Interface Display
B Unit Run Indicator
C Unit Fault Indicator
D Start Keypad
E Reset Keypad
F Stop Keypad
G System Alarms
H Navigation Keys
I Compressor Status Indicators
J Load Status
K Run Status
K Compressor Availability
  

Connectivity, Communication and Control at The Heart of Your Air System. Ingersoll Rand X8I System Automation is one air system control solution that quickly pays for itself, without compromising any of your previous compressor or air system capital investments. It is uniquely configurable and customizable to meet the specific needs of some of the most complex compressed air systems. Additionally, the X8I network can be expanded to include monitoring and control of additional compressed air system components. And beyond paying dividends in energy savings, it also provides ancillary savings in terms of labor, maintenance and resource utilization – here's how:

Versatile Networking. Manages up to eight positive displacement air compressors from any manufacturer, located up to 4,000 feet away from the controller!

Energy Control Mode. Adaptive control logic dynamically selects and utilizes the most efficient set of compressors to meet air system demands.

Anti-cycling. Continuous monitoring of system pressure and rate-of-change; uses advanced control algorithms to prevent unnecessary compressor cycling.

Single-point Control. Manage multiple compressors to one optimal control band or target.

Priority Compressor Selection. Minimize energy use by programming units or groups for optimum utilization and/or operations planning – including equalized usage.

Custom Pressure Selection. Four programmable pressure profiles – optimize system operation for specific production requirements.

Controlled Operations. Fully-adjustable time parameters help implement smooth, controlled schedule changes from one "target" pressure level to another.

Real-time System Scheduling. Configure control features including system standby and system prefill based on a real-time schedule.

Network Expandability. Integrate new compressors and distributed control through networked, intelligent I/O.

Easy Set-up/Operation. Improve your ability to optimize air system savings with an intuitive graphical interface for configuration and system information.

  
  
X-Series System Visualization
A better way to view your system

Simply add a VX module to any X8I or X12I network, complete some basic configuration, connect to your Local Area Network (LAN) or directly to a PC and view your compressed air system on your computer monitor. No special software is required.

With X-Series System Visualization you can monitor critical system and equipment parameters, drill down to individual compressors to view operational status and be alerted to any alarm messages. Complete system viewing from a local or remote PC has never been easier.

  
  
X-Series System benefits
 
    Convenient remote view of system and equipment status
 
    Critical parameter monitoring and fault notification
 
    Parameter graphing and trending
 
    System performance reporting and operating summaries
 
    Historical event recording
 
    Equipment maintenance scheduler
 
    Easy connection to the X-Series control network
 
    No special software to buy or maintain
  

  

Max. # Units
8 Compressors
Dimensions (LxWxD)
13.4” x 9.45” x 6.0”340 mm x 241 mm x 152 mm
Weight
16.5 lbs (7.5 kg)
Mounting
Wall, 4 x screw fixings
Enclosure
IP65, NEMA 4
Power Supply
230 VAC +/- 10% (50 Hz)115 VAC +/- 10% (60 Hz)
Temperature
32°F to 115°F (0°C to 46°C)
Humidity
0% to 95% Rh Non-condensing

DOWNLOADS

  

  

  

  

WE ALWAYS LIKE HEARING FROM OUR CUSTOMERS
 

HBR was founded in 1985 with a focus on distribution of equipament for the compressed air market.

 

Industrial applications

Contact info

Don't hesitate to get in touch with us, We would love to discuss on your project.

Headquarters: Rua Marco Giannini, 280 - Butantã - 05550-000 - São Paulo, Brazil

vendas@hbr.net

P/F: +55 11- 3611-6022